Utax 2506ci jam code 0511

[figaro]

Hi,

Anybody had any success in resolving this jam 0511 code issue on cassette 1

We have swapped primary feed units around, no luck.

Did the necessary as per bulletin TB-48B and the machine was working for a few days.

Did simulation 031, 032, 033 and tests were ok.

Firmware is the latest.

Reset machine 021 and 906 and no difference.

Anything that we overlooking?

[pascalb.]

Hi ,
- Does it work on cassette 2 in A4?
- Have you tested with another paper?
sometimes the paper is badly cut and takes several sheets.
I have already met him.
Kind regards

[Tonerkiller]

The feed clutch may be bad.

[figaro]

Hi ,
- Does it work on cassette 2 in A4?
- Have you tested with another paper?
sometimes the paper is badly cut and takes several sheets.
I have already met him.
Kind regards

Cassette 2 works 100%.
We tried different paper with the same results.

[figaro]

The feed clutch may be bad.

on inspection the clutch looks Ok...maybe we replace it with a new one and see.
will get back to you on this.

[avio2]

on inspection the clutch looks Ok...maybe we replace it with a new one and see.
will get back to you on this.

registration clutch

[lanierboy]

I would recommend that you change the paper feed drive assby as a complete unit.