Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Technician
    Join Date
    Jan 2014
    Location
    Wales
    Posts
    20
    Rep Power
    13

    Kyocera FS 2100 - Print Alignment Issue

    Good Morning

    A Strange one - although I can see on previous models about Print Alignment where by the Image is printed at the top edge of the page. (i.e) the IMage is put on the paper to early. See examples attached,

    Stripped down and cleaned sensors (including paper registration sensor) - my thinking this has worn down potentially or misshaped

    Any help would be much appreciated - trying to catch up on workshop work in the COVID 19 lock down.

    KR

    R
    doc04194320200316093840.pdf
    doc04194220200316093832.pdf

  2. #2
    IT Manager 2,500+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Florida
    Posts
    3,295
    Rep Power
    64

    Re: Kyocera FS 2100 - Print Alignment Issue

    What happen to printer? Did you do any adjustments? You should never have to adjust margins once factory set.
    Paper skew is the only issue look for a stuck label in feed path etc.....

  3. #3
    Trusted Tech 50+ Posts mita's Avatar
    Join Date
    Sep 2010
    Location
    Atlanta,GA
    Posts
    77
    Rep Power
    20

    Re: Kyocera FS 2100 - Print Alignment Issue

    Try using fresh paper, as far as image registration the actuator can wear down over time and cause that and jamming. But I have mostly seen this on high volume printers. Is the image off by the same margin all the time? If it varies replace the clutches and retest, also what condition are the feed /sep rollers in?

  4. #4
    Master Of The Obvious 10,000+ Posts
    Kyocera FS 2100 - Print Alignment Issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,170
    Rep Power
    311

    Re: Kyocera FS 2100 - Print Alignment Issue

    Quote Originally Posted by mita View Post
    Try using fresh paper, as far as image registration the actuator can wear down over time and cause that and jamming. But I have mostly seen this on high volume printers. Is the image off by the same margin all the time? If it varies replace the clutches and retest, also what condition are the feed /sep rollers in?
    I agree on all points. At 1M images the registration flag will nearly be sheared off, the registration clutches rusting, and the registration bushings oval. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here