Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Senior Tech 100+ Posts
    kyocera 1135mfp paper timing/registration adjustments


    Join Date
    Jan 2009
    Location
    Baton Rouge
    Posts
    231
    Rep Power
    37

    kyocera 1135mfp paper timing/registration adjustments

    Does anyone know what the procedure is for making timing/registration adjustments to these machines? I've got a handful of 1128s in the field and with them it is a sim mode (34 I think) but on the 1135 there is a whole slew of sim adjustments that are missing. I quit putting out Kyocera desktops years ago cause I just don't like them, so I only have this one 1135. Don't see anything in the service manual either unless I'm missing it.

  2. #2
    Service Manager 1,000+ Posts
    kyocera 1135mfp paper timing/registration adjustments


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: kyocera 1135mfp paper timing/registration adjustments

    Quote Originally Posted by Tom View Post
    Does anyone know what the procedure is for making timing/registration adjustments to these machines? I've got a handful of 1128s in the field and with them it is a sim mode (34 I think) but on the 1135 there is a whole slew of sim adjustments that are missing. I quit putting out Kyocera desktops years ago cause I just don't like them, so I only have this one 1135. Don't see anything in the service manual either unless I'm missing it.
    SIMS can be added or removed with firmware updates so make sure you're at the latest. Also, if you experiencing varying registration I would recommend new feed rollers, especially the sep tire and after that the drive unit/clutch pack. DR-150 I believe.

  3. #3
    Service Manager 1,000+ Posts
    kyocera 1135mfp paper timing/registration adjustments

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: kyocera 1135mfp paper timing/registration adjustments

    DR-150 for 1128 cod.302H493040
    For 1135 cod.302H994381. if have many prints, it is a good idea to first clean all the rubber rollers and sensors.

  4. #4
    Senior Tech 100+ Posts
    kyocera 1135mfp paper timing/registration adjustments


    Join Date
    Jan 2009
    Location
    Baton Rouge
    Posts
    231
    Rep Power
    37

    Re: kyocera 1135mfp paper timing/registration adjustments

    All rollers are new. The registration isn't reallly varying, I just want to adjust the timing a little bit so that her checks print better, needs to be moved a couple of mm to print a little higher above the line. If it wasn't for that she'd never even notice.

  5. #5
    Service Manager 1,000+ Posts
    kyocera 1135mfp paper timing/registration adjustments

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: kyocera 1135mfp paper timing/registration adjustments

    I have seen in the manual that FRPO commands can be used to reprogram the firmware in which the values ​​can vary but I have never done so. Perhaps it is more convenient to edit the document to be printed

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jun 2013
    Posts
    164
    Rep Power
    30

    Re: kyocera 1135mfp paper timing/registration adjustments

    Tom, to move the image up / down on the paper use the following FRPO command:
    !R! FRPO L2,XX;exit;

    Replace "XX" with a two digit number from 00 to 99. Smaller number raises the image, larger numbers lower it. The default is usually set to 50. If you need to move left / right it would be FRPO L4,XX.
    If you print a stat1 page you should be able to find the current settings on the second page I believe, may look something like 00/50/00/50.
    You can combine all commands into one and send to the machine with something like ICLink send file function. Here are all commands combined:

    !R! FRPO L2,50; FRPO L4,50; STAT1; EXIT;

    Can't remember on the 1135, but Kyocera's newer machine can take the command directly from a USB drive, just write your command into a text file with something like notepad and save it to the USB drive, then change the .txt name to .capt, insert it into the USB slot and print the file. Nothing will print (except the stat pages if called) but it will make the setting changes if done correctly.

  7. #7
    Master Of The Obvious 10,000+ Posts
    kyocera 1135mfp paper timing/registration adjustments

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: kyocera 1135mfp paper timing/registration adjustments

    Good to know, Thanks. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here