Thanks:
0
Dislikes:
0
-
Ecosys P7240cdn -Three Tier setup
Have tried to set the Color three tier with the Prescribe commands: I ran each line as a separate Print command.
!R! KCFG "TCCM",1;exit;
!R! KCFG "STCT",1,50;EXIT;
!R! KCFG "STCT",2,100;exit;
But still does not show up.
Last edited by kuby; 03-19-2020 at 07:00 PM.
-
Re: Ecosys P7240cdn -Three Tier setup
Kuby,
I think the bulletin may be slightly incorrect; try the following commands with single quote '. This was written as one command to turn tiered on, set values, and print status pages.
!R! KCFG'TCCM',1;
KCFG'STCT',1,20;
KCFG'STCT',2,50;
stat;
stat1;
EXIT;
-
Re: Ecosys P7240cdn -Three Tier setup
Thanks, fixed it. The stupid Windows 10 drivers were messing it up. Have to go it and make sure that Windows 10 does not automatically install WSD drivers for Kyocera even though you install it VIA Tcp/Ip.
Last edited by kuby; 03-19-2020 at 07:07 PM.
-
Senior Tech
100+ Posts
- Rep Power
- 31
Re: Ecosys P7240cdn -Three Tier setup
you just putted different levels as asked
asked
O-2
2-5
+5
suggested
0-5
5-10
+10
this van have a huge inpact if the customer is charged with toner coverage.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks