Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    55
    Rep Power
    9

    print quality kyocera taskalfa 3051ci

    Hi everyone! I have this issue with taskalfa 3051ci only with magneta and black colors. I have done drum refresh, developer refresh and calibration but with no success!
    img.JPG

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Apr 2016
    Location
    astoria or
    Posts
    140
    Rep Power
    12

    Re: print quality kyocera taskalfa 3051ci

    I would pull developer units and check mag rollers

  3. #3
    Technician
    Join Date
    Mar 2019
    Location
    Christchurch
    Posts
    10
    Rep Power
    3

    Re: print quality kyocera taskalfa 3051ci

    Have had a fair few of this problem. When I see this I replace both the drum and dev for that colour.
    Never found out what causes this.

  4. #4
    Trusted Tech 50+ Posts Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    55
    Rep Power
    9

    Re: print quality kyocera taskalfa 3051ci

    The problem was from developer roller side, not from the drum!

  5. #5
    Master Of The Obvious 10,000+ Posts
    print quality kyocera taskalfa 3051ci

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,256
    Rep Power
    313

    Re: print quality kyocera taskalfa 3051ci

    It's the developer spacers cracking. Magenta and black developing units will do the trick. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Technician
    Join Date
    Mar 2019
    Location
    Christchurch
    Posts
    10
    Rep Power
    3

    Re: print quality kyocera taskalfa 3051ci

    I replace both because from my experience with this fault the problem reappears if I replace just the dev or drum. The local Kyocera rep couldn't tell me the cause but Kyocera has supplied replacement drums and devs as the copiers were still under warranty.

  7. #7
    Senior Tech 100+ Posts Ropariva's Avatar
    Join Date
    Mar 2016
    Posts
    196
    Rep Power
    11

    Re: print quality kyocera taskalfa 3051ci

    As per Blackcat. The spacer rollers (black rollers) wear on the shaft reducing the gap. Later devs and hi speed machines used a white nylon roller which didn’t wear.

  8. #8
    Senior Tech 100+ Posts
    print quality kyocera taskalfa 3051ci

    Scott's Avatar
    Join Date
    Dec 2009
    Location
    mineola
    Posts
    130
    Rep Power
    23

    Re: print quality kyocera taskalfa 3051ci

    Charge rollers

  9. #9
    Service Manager 5,000+ Posts
    print quality kyocera taskalfa 3051ci

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,272
    Rep Power
    178

    Re: print quality kyocera taskalfa 3051ci

    Quote Originally Posted by Scott View Post
    Charge rollers
    already diag'd as dev units.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here