M3540idn part identification (tray size sensor)

[copiertec]

Kyocera size detecter.jpg

This is a tray 1 size sensor attached to the M3540idn, I looked in the parts manual but can not find this part #. Anyone have the part #? Thank you.

[mga]

Kyocera size detecter.jpg

This is a tray 1 size sensor attached to the M3540idn, I looked in the parts manual but can not find this part #. Anyone have the part #? Thank you.

I think this is what you need item 2

[copiertec]

I think this is what you need item 2

Just looked at a 3640 we have in parts, the switches are not the same as the 3640 is on the left side, this one is on the right side.

[lees]

Here is a part number we have for the FS2100 which is the printer this MFP is based on. It should be the same even though it is a strange number.
5FSP03090001+01 cassette size switch

[copiertec]

Here is a part number we have for the FS2100 which is the printer this MFP is based on. It should be the same even though it is a strange number.
5FSP03090001+01 cassette size switch

That is the same # as the 3640mfp switch, I removed one from a parts machine, they are not the same as the M3540idn switch, its totally different. I have re read the m3540idn parts manual several times and it is not listed (edition 5).

[JR2ALTA]

My FS2100/4200 manual has 7SP03072001+H01 as the likely canidate.

[JR2ALTA]

My FS2100/4200 manual has 7SP03072001+H01 as the likely canidate.

I dunno, maybe that's just the front door switch. Your best bet is to get a hold of the Dallas Parts Department.

[copiertec]

My FS2100/4200 manual has 7SP03072001+H01 as the likely canidate.

That's it, I believe, looks the same in the pictures I searched, it says it work for a TA 3500i as well, we have a few parts ones I can search. Thank you, JR2ALTA.

[KYO_OEM]

You also can use partslist from PF-320/ Paper feed section 1/Item #17