Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: HYPAS ISSUE

  1. #1
    Technician
    Join Date
    Jun 2016
    Posts
    24
    Rep Power
    9

    HYPAS ISSUE

    I have a dealer client who has installed a new Kyocera Taskalfa 352ci and their IT technician has tried to remote into the device via the web browser and the device Ip and finds that when he goes to Links on the device web page he finds that he is unable to access the Hypas applications so that he can install Paper cut remotely.
    The SD card has been changed for a new one and reformatted.
    I have installed a version of the pkg file for Paper cut and have deactivated it as the IT chap has not got the naming convention yet.

    Does any one know why this can not be accessed remotely?

    The firmware is on a September 2019 version but I can not check the current version as the new Kyocera site does not have this model listed at present.
    Any help would be gratefully received please.

  2. #2
    Technician
    Join Date
    Jan 2020
    Location
    KENT
    Posts
    24
    Rep Power
    1

    Re: HYPAS ISSUE

    Log into the device and check the security settings. Something should jump out at you there. It's much easier to navigate this device via the web than via the Ops Panel..lol


    All the best!

  3. #3
    Technician
    Join Date
    Jun 2016
    Posts
    24
    Rep Power
    9

    Re: HYPAS ISSUE

    Many thanks Mr Magic, the issue I am getting is in Canterbury. I see that you are from Kent which I presume is the Uk and not US.

    I will check out the settings and update this posting when I get a result.

    Once again thanks for your advice.

  4. #4
    Trusted Tech 50+ Posts
    HYPAS ISSUE

    diedux's Avatar
    Join Date
    Jan 2017
    Location
    Somewhere
    Posts
    56
    Rep Power
    9

    Re: HYPAS ISSUE

    Hi,
    First, you don't see HyPAS link in CC RX until you install SD card and it is recognized by an MFD.
    Personally I rarely access PaperCut via device web page. You can access embedded config directly "http://<deviceIP>:8080/papercut/admin"


    Make sure there are no network restrictions that could prevent access HyPAS page on 8083 port. Also, try a different browser and navigate directly to "https://<deviceIP>:8083".

    BR

  5. #5
    Technician
    Join Date
    May 2011
    Posts
    39
    Rep Power
    19

    Re: HYPAS ISSUE

    Release Firmware Version: 02.03.0010 TASKalfa_352ci_v.02.03.0010_(2019-09-23) dernier firmware

    Liste des Copieurs Compatible HY-Pass
    ECOSYS M2640idw * ECOSYS M3040idn, M3540idn, M3550idn, M3560idn
    ECOSYS M3145idn, M3655idn, M3660idn, M3645idn ECOSYS M4125idn *, M4132idn
    ECOSYS M6035cidn, M6535cidn ECOSYS M6026cidn *, M6526cidn *
    ECOSYS M6230cidn, M6630cidn, M6235cidn, M6635cidn ECOSYS M8124cidn *, M8130cidn
    TASKalfa 206ci *, 256ci * TASKalfa 250ci *, 300ci *, 400ci *, 500ci *
    TASKalfa 256i *, 306i * TASKalfa 265ci * TASKalfa 266ci *
    TASKalfa 300i *, 420i *, 520i * TASKalfa 306ci *, 356ci, 406ci
    TASKalfa 307ci TASKalfa 350ci, 351ci
    TASKalfa 552ci * TASKalfa 2460ci *, 2470ci TASKalfa 2510i *, 2520i
    TASKalfa 2550ci, 3050ci, 3550ci, 4550ci, 5550ci, 6550ci, 7550ci
    TASKalfa 2551ci, 3051ci, 3551ci, 4551ci, 5551ci, 6551ci, 7551ci
    TASKalfa 2552ci, 3252ci, 3552ci, 4052ci, 5052ci, 6052ci, 7052ci, 8052ci
    TASKalfa 2553ci, 3253ci, 3553ci, 4053ci, 5053ci, 6053ci, 7053ci, 8053ci.
    TASKalfa 3010i, 3501i, 3510i, 4501i, 5501i, 6501i, 8001i
    TASKalfa 3011i, 3511i, 4002i, 5002i, 6002i, 7002i, 8002i TASKalfa 3212i, 4012i
    TASKalfa 3500i, 4500i, 5500i, 6500i, 8000i TASKalfa 9002i
    FS-6525MFP *, FS-6530MFP * FS-C8520MFP *, FS-C8525MFP *
    FS-3540MFP *, FS-3640MFP *, LS-3640MFP * FS-C2526MFP *, FS-C2626MFP *
    * La numérisation intégrée n'est pas prise en charge. Compteur scanner pas pris en charge
    Cordialement,



    Quote Originally Posted by chester View Post
    I have a dealer client who has installed a new Kyocera Taskalfa 352ci and their IT technician has tried to remote into the device via the web browser and the device Ip and finds that when he goes to Links on the device web page he finds that he is unable to access the Hypas applications so that he can install Paper cut remotely.
    The SD card has been changed for a new one and reformatted.
    I have installed a version of the pkg file for Paper cut and have deactivated it as the IT chap has not got the naming convention yet.

    Does any one know why this can not be accessed remotely?

    The firmware is on a September 2019 version but I can not check the current version as the new Kyocera site does not have this model listed at present.
    Any help would be gratefully received please.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here