Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    Apr 2015
    Location
    Venice
    Posts
    44
    Rep Power
    0

    TASKalfa 4052ci Error codes C7901, C7903, C7904, C7911

    Hi Guys,

    I have a TASKalfa 4052ci who gives these error codes in the last month:
    C7901, C7903, C7904, C7911.
    The first and the last in this morning. Lately things are going badly...
    A couple of times error C7620.

    Service manual talks about dirty in contacts but I don't think it's my case. A poor contact on a drum must give multiple errors on the same drum.
    Here codes are rolling quickly!

    Someone has seen these errors?
    How to resolve?

    Some little printer statistics:
    About 150k prints, 118k BW and 32k color
    Firmware updated!

    Thank you in advance,
    Kyove

  2. #2
    Field Supervisor 500+ Posts
    TASKalfa 4052ci Error codes C7901, C7903, C7904, C7911

    copiertec's Avatar
    Join Date
    Jan 2016
    Location
    Centereach, L.I. New York
    Posts
    738
    Rep Power
    26

    Re: TASKalfa 4052ci Error codes C7901, C7903, C7904, C7911

    Service manual does not mention dirty contacts, but it does mention to make sure all connectors are connected to start with. Being the codes are all drum and developer related, first, I would make sure you are receiving proper voltage and ground to the mfp, 2) which you already have done- update the firmware. If these do not fix your issue you could try installing another black drum/ developing unit and see if those codes are corrected. If they are not corrected after installing those parts, you are looking at board issues particularly the engine pwb.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Aug 2011
    Posts
    123
    Rep Power
    20

    Re: TASKalfa 4052ci Error codes C7901, C7903, C7904, C7911

    1. step
    Check serialnumbers from DK units by U117 and/ or DV serialnumbers by U984
    Mostly you`ll see same serialnumber for 2 or more units.
    Now you must find broken unit by using well working other DK/ DV unit.
    2. step
    reconnect YC17 on feed image pwb, sometimes bad connections on pin B17 - B20/ missing 3,3V power supply for Eeprom communication.
    3. step
    also check YC1 on drum/ developer relay pwb pin 1-6

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here