Hello for every body, I have a problem with Kyocera ecosys 2035, the sheet of paper stops in duplex area, I'm new in this brand, for your help thanks
Thanks: 0
Likes: 0
Dislikes: 0
Jamming duplex Kyocera ecosys 2035
Hello for every body, I have a problem with Kyocera ecosys 2035, the sheet of paper stops in duplex area, I'm new in this brand, for your help thanks
Do you have a jam code you could share with us? When it jams is by the fuser? When duplexing have you observed if the paper has problems being reversed in the paper conveying section. Most likely you have a bad solenoid in the paper conveying unit and the machine cannot pull the paper back for the second side.Originally Posted by roger19
look for a switch pop out of its mount
just snap it back into place.
First thing to do is to print off the error log, to see what the jam code is. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Reply With Quote
Bookmarks