Again ... Samples?
Thanks: 0
Likes: 0
Dislikes: 0
Again ... Samples?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
no we must ask you the following:
How it`s possible to get "White eagle on white background/ paper"
Answer:
missing toner on sleeve roller from dev unit, faulty transfer, or miising laser power.
Why you got stripes at this area on old drum?
Maybe broken/ faulty sleeve roller/ 2. possibilty: problem with DLP rail lever
What happens if you
1.
set U100/ AC Auto adjust from ON to OFF
2.
remove main charger
3.
test print
Do you get full solid black without white areas?
If yet: no problem with DV or TR
If not: problem with DV or TR
Don`t forget to switch back U100 after repair.
Reply With Quote
Bookmarks