Help with printer km3530

[randyprinter]

I recently installed the maintenance kit and replaced drum, developer, fuser and rollers about six months ago. Everything was working smooth until now. Please see picture I don't know what it could be. 123_1(1).jpg123_1(1).jpg

[Phil B.]

I recently installed the maintenance kit and replaced drum, developer, fuser and rollers about six months ago. Everything was working smooth until now. Please see picture I don't know what it could be. 123_1(1).jpg123_1(1).jpg

is the print in the defect area rubbing off? that would be the fuser.

[randyprinter]

Some times it smudge. After 4-6 pages it comes out okay.

[bsm2]

Stop the copy before it enters the fuser, if image is ok then it's the fuser. If it's before check the DEV unit

[randyprinter]

Stop the copy before it enters the fuser, if image is ok then it's the fuser. If it's before check the DEV unit

I will try that right away. Is there an easy way to stop it before it reaches the fuser? or do I just pull out the plug?

[Phil B.]

I will try that right away. Is there an easy way to stop it before it reaches the fuser? or do I just pull out the plug?

open the front/top door

[randyprinter]

open the front/top door

I thought there was a kill switch. Sorry.

[Scottb]

does that model have the green pressure buttons for the fuser if i remember right like the fs3040 that may be your issue

[randyprinter]

does that model have the green pressure buttons for the fuser if i remember right like the fs3040 that may be your issue

Thank you for the reply if it is the issue how do you recommend I resolve it if there is a green button

[Phil B.]

Thank you for the reply if it is the issue how do you recommend I resolve it if there is a green button

if i not mistaken those are for envelope mode.. make sure they are both in the same position