Kyocera 3500 2202

[McCrazy]

I've got a Kyocera 3500 giving a 2202 Error when scanning to email. The scan is delivered to to the email address, but will randomly flash a 2202 error. We have updated the firmware. Would changing the timeout from 30 seconds to 60 seconds fix this? This doesn't happen on every scan, but all scans do go through to email addresses.

[bsm2]

I've got a Kyocera 3500 giving a 2202 Error when scanning to email. The scan is delivered to to the email address, but will randomly flash a 2202 error. We have updated the firmware. Would changing the timeout from 30 seconds to 60 seconds fix this? This doesn't happen on every scan, but all scans do go through to email addresses.

Yes also check the dns settings and update if needed

[tedtech]

I've seen something similar to this where the customer had an Exchange server; a cache of some sort got full and basically used up the HDD and ran out of storage. Clearing the cache stopped the problem. Maybe this will help

[bsm2]

also make sure time and date on copier is correct