Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Service Manager 1,000+ Posts
    TA 3050 3550ci Fuser Belt (UFR) from Katun

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    1,261
    Rep Power
    46

    Re: TA 3050 3550ci Fuser Belt (UFR) from Katun

    Quote Originally Posted by Doug James View Post
    Appreciate ya !! I have rebuilt a few and had problems with one but I think it was more my fault. Katun has a video of the rebuild and is great !!!
    Kyocera Mita Taskalfa 3050 CI-series Fuser Belt Installation Instructions Video - YouTube

    Thanks for sharing. I've got to try it.

  2. #12
    Flawed Scrub 500+ Posts
    TA 3050 3550ci Fuser Belt (UFR) from Katun

    jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere
    Posts
    690
    Rep Power
    32

    Re: TA 3050 3550ci Fuser Belt (UFR) from Katun

    Less than 50k you are gonna get out of rebuild fuser for these.

    Kyocera coulntd get their fuser alignment right from factory, bearing always fail prematurely vs claimed.

    The process of rebuilding will change the stress balance on the rollers.

    If you are in the bind, as we were, but you are starting a vicious cycle...your boss will find out you can, and soon he will ask if you rebuild others. And then you will find you will have less time for more important clients, and eventually, cut into your personal time.
    The onus to exercise good covid precaution is on the individual. Just like wearing seatbelt.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here