Thanks: 
Likes: 
Dislikes: error F000 try to enter service mode typing 10871087 (|to execute some programms) but machine doesn't enters me into service mode . What's the problem?
error F000 try to enter service mode typing 10871087 (|to execute some programms) but machine doesn't enters me into service mode . What's the problem?
Originally Posted by Gab
Try changing memory. If that doesn't work:
F000: Communication error between main PWB and operation PWB
Turn the main power switch off/on to restart the machine. If the error is not resolved, replace main PWB
Replace the operation PWB and check for correct operation.
try to flash it
Try updating the firmware with the latest version.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
can i use memory from an other similar machine?
Because i tried to upgrade firmaware but machine desn't accepted it i read thata i must use main usb not the one on panel . Where is it?
open the front door than try
The main usb port is located on the controller at the back of machine.
You might have to do emergency firmware.
system won`t accept any USB key, no full start up procedure finished and finally no upgrade possible.
If system stucks in "Welcome", upgrade possible but if F000 is coming up after a while, it can`t work.
I tried to duplicate some possibilities.
See enclosed picture.
Screen failure.JPG
Reply With Quote
Bookmarks