error F000 try to enter service mode typing 10871087 (|to execute some programms) but machine doesn't enters me into service mode . What's the problem?
error F000 try to enter service mode typing 10871087 (|to execute some programms) but machine doesn't enters me into service mode . What's the problem?
try to flash it
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
can i use memory from an other similar machine?
Because i tried to upgrade firmaware but machine desn't accepted it i read thata i must use main usb not the one on panel . Where is it?
open the front door than try
The main usb port is located on the controller at the back of machine.
You might have to do emergency firmware.
system won`t accept any USB key, no full start up procedure finished and finally no upgrade possible.
If system stucks in "Welcome", upgrade possible but if F000 is coming up after a while, it can`t work.
I tried to duplicate some possibilities.
See enclosed picture.
Screen failure.JPG
Bookmarks