replaced the maintenance kit and now machine just keeps adding toner. Must of done something wrong was working prior.
replaced the maintenance kit and now machine just keeps adding toner. Must of done something wrong was working prior.
I'll bet that you didn't run U130 to fill the new developing unit with toner. I will do it eventually, it will just take a really long time. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I did enter the 10871087 and set 130. when you say it will take a really long time, are you suggesting just let it run? from the feel of the toner it has taken close to 1/3 of a new cartridge.
1/3 to 1/2. Yes, let it run.
It's mono-component toner, and the developing unit comes empty. Also keep in mind that you'll usually get some mottling when filling the developing unit for the first time. Just dry-wipe away any lumps of toner on the developing roller. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks