Results 1 to 5 of 5
  1. #1
    Technician
    2540   adding toner


    Join Date
    Jul 2020
    Location
    canton Ohio
    Posts
    10
    Rep Power
    4

    2540 adding toner

    replaced the maintenance kit and now machine just keeps adding toner. Must of done something wrong was working prior.

  2. #2
    Master Of The Obvious 10,000+ Posts
    2540   adding toner

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,636
    Rep Power
    375

    Re: 2540 adding toner

    I'll bet that you didn't run U130 to fill the new developing unit with toner. I will do it eventually, it will just take a really long time. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician
    2540   adding toner


    Join Date
    Jul 2020
    Location
    canton Ohio
    Posts
    10
    Rep Power
    4

    Re: 2540 adding toner

    I did enter the 10871087 and set 130. when you say it will take a really long time, are you suggesting just let it run? from the feel of the toner it has taken close to 1/3 of a new cartridge.

  4. #4
    Master Of The Obvious 10,000+ Posts
    2540   adding toner

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,636
    Rep Power
    375

    Re: 2540 adding toner

    1/3 to 1/2. Yes, let it run.

    It's mono-component toner, and the developing unit comes empty. Also keep in mind that you'll usually get some mottling when filling the developing unit for the first time. Just dry-wipe away any lumps of toner on the developing roller. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Field Supervisor 500+ Posts
    2540   adding toner


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    730
    Rep Power
    46

    Re: 2540 adding toner

    Quote Originally Posted by billmcwho View Post
    I did enter the 10871087 and set 130. when you say it will take a really long time, are you suggesting just let it run? from the feel of the toner it has taken close to 1/3 of a new cartridge.
    If you stop the new developer setup before it reaches it's ten minute cycling, the next time you activate the machine it will go back to the beginning and try to cycle for ten minutes, in that senario it could easy use half the cartridge. Let it run its cycle.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here