If remaining toner (toner gauge) will show value > 4000 and toner motor can`t forward enough toner, system will show toner empty also...
e.g.
(not real values, for better understanding only)
during 1 turn from motor 0,1mg toner would forwarded to DV unit
1mg = 0,1V
after 20 turns, in normal condition 2mg toner will reach the toner sensor from DV unit.(0,2V)
If now the value from toner sensor will increase about 0,1V only by >20 turns, system will skip the RFID informations.
Motor is turning > 50 turns in real if expected value not reached..and finally you will get the message "toner empty"..
Bookmarks