If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Oh, and don't try using that FK-8550H fuser in your KM-3252ci. If you install with power ON, the machine will continue to run, compressing the pages in exit making them increasingly wavy, especially ledger. If you power OFF/ON it will error fuser mismatch.
Ask me how I know. =^..^=
Last edited by blackcat4866; 01-21-2021 at 02:19 AM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
OK thanks so much BC...
Am i correct here? .. the 32xx is low speed model design.. (32ppm is top speed for that model) . and the 35xx is the high speed design (and 35ppm is slowest on up to the 5053ci or even 8353ci?)
im deciding between the 2 because im looking to propose a 30ish ppm color A3 Kyocera..
(wow im on EU site.. the 3554ci is out!)
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
This is not correct, sorry.
25ppm + 35ppm no license key available, see attachment......
so a 25xxci is really a firmware crippled 35xxci
Today now i installed our first 2554ci prelauch system.
@skynet
sorry, you are right!
I found 2 labels for 25ppm + 35ppm inside from box
But we can`t order license for 35ppm at the moment.
Now we are waiting for toner to start analysing/ testing and so on.
Bookmarks