Results 1 to 7 of 7

Thread: kyocera 3500i

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    95
    Rep Power
    10

    kyocera 3500i

    i need to replace the registration clutch and would like to know if its a bear of a job or is it easy the book has nothing on it and im mostly toshiba
    thanks
    bruce

  2. #2
    Master Of The Obvious 10,000+ Posts
    kyocera 3500i

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,504
    Rep Power
    371

    Re: kyocera 3500i

    8 years and I've not had to touch a registration clutch yet. I had to look it up to confirm that the 3500i even has a clutch. The 45 and 55 use a registration motor.

    Just out of curiosity, why are you changing it? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    95
    Rep Power
    10

    Re: kyocera 3500i

    Quote Originally Posted by blackcat4866 View Post
    8 years and I've not had to touch a registration clutch yet. I had to look it up to confirm that the 3500i even has a clutch. The 45 and 55 use a registration motor.

    Just out of curiosity, why are you changing it? =^..^=
    the image is shifting to the leading edge but not the same every time and sometimes not at all

  4. #4
    Master Of The Obvious 10,000+ Posts
    kyocera 3500i

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,504
    Rep Power
    371

    Re: kyocera 3500i

    Also make sure that the registration roller bushings are turning freely. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    95
    Rep Power
    10

    Re: kyocera 3500i

    Quote Originally Posted by blackcat4866 View Post
    Also make sure that the registration roller bushings are turning freely. =^..^=
    ok but what about the clutch is there one and is it a bear to replace

  6. #6
    Master Of The Obvious 10,000+ Posts
    kyocera 3500i

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,504
    Rep Power
    371

    Re: kyocera 3500i

    There is one. I've not had to touch it. It's probably going to be behind the paper feed1 board, and a bunch of harnesses. Yes, unpleasant. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Senior Tech 250+ Posts
    kyocera 3500i


    Join Date
    Apr 2013
    Location
    Jasper
    Posts
    262
    Rep Power
    19

    Re: kyocera 3500i

    you will have to remove the developer and the registration dust collector felt, and then the right side door and lower rear cover, the connector and two wire holders, and four screws holding the reg roller assy. once out of the machine you will see the clutch near the white gears...
    Unless it has rust dust coming out of it, it is probably still okay.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here