Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Technician
    Join Date
    Jul 2010
    Posts
    25
    Rep Power
    28

    CS-3010i intermitent black lines when printng or copying

    Hi,
    i have this problem with 2- CS-3010i and 1- CS-3510i all installed on different offices/customers

    Problem:
    Intermittent black lines across pages, perpendicular to the page movement. (see the attachments) it can print fine for a few hundred pages or show the problem few times a day.

    already replaced:
    Drum Unit, Developer unit, bias voltage board, reconnected connectors on boards.

    The cs-3510i started showing the problem when it was almost new. i had to replace all 3 machines and now i have them in my warehouse.
    Attached Images Attached Images

  2. #2
    Owner/Service Manager 1,000+ Posts
    CS-3010i  intermitent black lines when printng or copying

    tmaged's Avatar
    Join Date
    Oct 2008
    Location
    Center of my Universe
    Posts
    1,759
    Rep Power
    60

    Re: CS-3010i intermitent black lines when printng or copying

    Bulletin I003 might be of interest to you.
    Hope that helps !
    -Tony


    www.dtios.com
    Become a fan on Facebook

  3. #3
    Master Of The Obvious 10,000+ Posts
    CS-3010i  intermitent black lines when printng or copying

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: CS-3010i intermitent black lines when printng or copying

    That looks like a laser failure, to me. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: CS-3010i intermitent black lines when printng or copying

    same problem whit utax 3060 and utax 2540
    there are false contacts between the connectors main charge, drum dv unit and those in the main body

  5. #5
    Technician
    Join Date
    Jul 2010
    Posts
    25
    Rep Power
    28

    Re: CS-3010i intermitent black lines when printng or copying

    Could you explain the steps to resolve the false contacts?... since the contacts have springs and i already stretched them but the problem persist...

    Thanks in advance!

  6. #6
    Service Manager 10,000+ Posts
    CS-3010i  intermitent black lines when printng or copying

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: CS-3010i intermitent black lines when printng or copying

    Quote Originally Posted by mad View Post
    Could you explain the steps to resolve the false contacts?... since the contacts have springs and i already stretched them but the problem persist...

    Thanks in advance!
    yes you pulled the springs out BUT are they making the proper contact with the units?

    were the drum/dev units you replaced NEW or were they pulls from another machine?

    did you init them in service mode?

    have you cleaned the laser glass? BC mentioned the laser have you tested that?

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Jul 2010
    Location
    torino
    Posts
    150
    Rep Power
    29

    Re: CS-3010i intermitent black lines when printng or copying

    [QUOTE = mad; 1733318] Potresti spiegare i passaggi per risolvere i falsi contatti? ... visto che i contatti hanno molle e li ho già allungati ma il problema persiste ...

    Grazie in anticipo! [/ QUOTE]
    you must also deoxidize these well and check that the groups remain firmly pressed and also check the connectors that go on the hvt

    excuse me for my bad english
    Attached Images Attached Images

  8. #8
    Technician
    Join Date
    Jul 2010
    Posts
    25
    Rep Power
    28

    Post Re: CS-3010i intermitent black lines when printng or copying

    Quote Originally Posted by Phil B. View Post
    yes you pulled the springs out BUT are they making the proper contact with the units?

    were the drum/dev units you replaced NEW or were they pulls from another machine?

    did you init them in service mode?

    have you cleaned the laser glass? BC mentioned the laser have you tested that?
    Thanks for you reply Phil B

    new developer and drum,
    the laser is clean and working as shows the enlarged image (the text can be seen "behind" the black line (green arrow)
    the lack of a white margin (red arrow) tells me is a problem with the developer bias voltage or maybe a drum ground problem...


    the path of the Developer bias voltage has many "steps" and a 3 or more springs to get to the magnetic roller.
    each one of this "steps" is a possible false contact. and the springs are difficult to handle because their location.

    i was hopping that someone had figured out...
    Attached Images Attached Images

  9. #9
    Master Of The Obvious 10,000+ Posts
    CS-3010i  intermitent black lines when printng or copying

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: CS-3010i intermitent black lines when printng or copying

    Quote Originally Posted by mad View Post
    Thanks for you reply Phil B

    new developer and drum,
    the laser is clean and working as shows the enlarged image (the text can be seen "behind" the black line (green arrow)
    the lack of a white margin (red arrow) tells me is a problem with the developer bias voltage or maybe a drum ground problem...


    the path of the Developer bias voltage has many "steps" and a 3 or more springs to get to the magnetic roller.
    each one of this "steps" is a possible false contact. and the springs are difficult to handle because their location.

    i was hopping that someone had figured out...

    I see the image behind the bars crossfeed. I agree that it's probably not the laser. Probably a high voltage, either developing bias or primary charge. The HVT (high voltage PWB) seems like the next logical choice.

    Vedo l'immagine dietro le sbarre crossfeed. Sono d'accordo che probabilmente non è il laser. Probabilmente un alto voltaggio, che sviluppa polarizzazione o carica primaria. L'HVT (PWB ad alta tensione) sembra la prossima scelta logica.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  10. #10
    Field Supervisor 500+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    584
    Rep Power
    0

    Re: CS-3010i intermitent black lines when printng or copying

    Are black lines repeted at same distances. If yes from these distances you can find what cylinder (drum, chatge etc) it causes it (the perimeter is equal to distance).

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here