Question? Can you import a Job Accounting list from one Kyocera machine to another? Never did this and do not see a Import/Export button.
Thanks
Question? Can you import a Job Accounting list from one Kyocera machine to another? Never did this and do not see a Import/Export button.
Thanks
This can be done via Net Viewer and also via U917 using the Setup Tool.
Thanks, Will try that.
Thanks
You have to add the accounting module to KM Netviewer on install as an option
Should have added, trying to do it by Remote as the machine is 50 miles away.
Used to work on Canon's and they have a import/export feature for the address book. Just did not know if that could be done by remote for the Job Accounting on the Kyocera.
Thanks
You can pull a 917 through KFS. Just have to get the customer to hit yes on copier.
Run the KNV installer and there will be an option to add it.
MM917 will not exchange files between different models (diff series or CvsBW). The files can be converted using the SetupTool.
Netviewer requires you to be on-premise or VPN.
Kyocera Device Manager will be replacing KM-Net Viewer but at last check does not have Multi-Set for Accounting yet.
Bookmarks