Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: kyocera 2540dw

  1. #1
    Technician
    kyocera 2540dw


    Join Date
    Jul 2020
    Location
    canton Ohio
    Posts
    10
    Rep Power
    3

    kyocera 2540dw

    getting jams out of the fuser, machine has about 120K. get a 4211 code. pulled the fuser cleaned the sensor (had very little dust) Is there a way to check the sensor without replacing it? The press roller and fuser sleeve look new. thanks for any input Bill

  2. #2
    Field Supervisor 500+ Posts
    kyocera 2540dw


    Join Date
    May 2009
    Location
    Concord, NH
    Posts
    725
    Rep Power
    46

    Re: kyocera 2540dw

    Quote Originally Posted by billmcwho View Post
    getting jams out of the fuser, machine has about 120K. get a 4211 code. pulled the fuser cleaned the sensor (had very little dust) Is there a way to check the sensor without replacing it? The press roller and fuser sleeve look new. thanks for any input Bill
    You need to replace the fuser assembly under warranty. The problem is not the sensor, it is the slider material that the fuser film rides on has come unglued and is slowing down the paper causing a timing error. There is a tech bulletin out on this. Many times you can observe smudges on the copy/prints.

  3. #3
    Field Supervisor 500+ Posts Luther's Avatar
    Join Date
    May 2006
    Location
    crystal lake ,Illinois
    Posts
    669
    Rep Power
    38

    Re: kyocera 2540dw

    Also update the firmware when you replace the fuser, it changes some fuser timing to help with this problem

  4. #4
    Master Of The Obvious 10,000+ Posts
    kyocera 2540dw

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,504
    Rep Power
    371
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Senior Tech 250+ Posts
    kyocera 2540dw


    Join Date
    Apr 2013
    Location
    Jasper
    Posts
    262
    Rep Power
    19

    Re: kyocera 2540dw

    its best to replace the fuser, but often you can give that fuser exit sensor arm spring another wrap and it will get you by for a little while

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here