Reset

[copier tech]

it's called following RULES....

and to keep up the butthurt and whining shows just how petty you are... are you a man or a female? sounds like the latter to me.

your out? does that mean you are leaving for good? God I hope so.

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

[tsbservice]

There are a couple of ways to do this
Note this method will only work if the printer was set to dhcp.
With the device turned on plug it into an active network and give it a couple of minutes to get an ip address. Go to service mode 000 reports and print a network status. Put the ip address of the printer in a web browser and login to the printers rui as admin. Go to tcp-ip reset / initialize to factory defaults.

The ugly method
service mode > 21 memory clear reboot, now you have to be quick before papercut kicks in again, goto system / application / login / deactivate papercut. Do a final memory clear, reboot and papercut should be history.

With kyo there are no machine specific settings to put back and in your case you wanted it reset.

OP didn't find time/desire to respond if skynet valid advices are tried...

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

besides why your sites have to be bumped in this thread?

[Phil B.]

Rules are made to be broken.

Talking of braking rules for all your firmware needs please visit us at the link below.

hey bud I see no link

yup broken rules.. just look at the dimwit party

[copier tech]

OP didn't find time/desire to respond if skynet valid advices are tried...



besides why your sites have to be bumped in this thread?

Free marketing dude that's why.

[copier tech]

hey bud I see no link

yup broken rules.. just look at the dimwit party

Should you have missed it our link is in my signature. (or below this post now)

Printer & Copier Firmware - www.printerfirmware.co.uk

[tsbservice]

Free marketing dude that's why.

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

[copier tech]

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

Happy to reply.

Yes should you need this firmware drop us an email.

[slimslob]

hey bud I see no link

yup broken rules.. just look at the dimwit party

It is in his signature line. When you got him to put it in the body of the post, that made the post one that can be and has been reported. Now if we had a paid advertiser like Just Manuals used to be, then the signature line could also be reported.

[copier tech]

It is in his signature line. When you got him to put it in the body of the post, that made the post one that can be and has been reported. Now if we had a paid advertiser like Just Manuals used to be, then the signature line could also be reported.

We at printerfirmware.co.uk appreciate your support Slim.

[tsbservice]

Offtopic:

I see you asked for Canon machine system software maybe day ago, if I hook you up with this freely will you put the same software/firmware files on your site available to purchase?

No need to reply I know the answer...it's free business opportunity

Happy to reply.

Yes should you need this firmware drop us an email.

Yep still no need to reply