Have a 406ci that is not printing the yellow. Have put a developing unit it and a drum unit from a good machine and still nothing. And the ones from this machine work in the other machine?
Glass under the dev/unit unit is clean.
Have a 406ci that is not printing the yellow. Have put a developing unit it and a drum unit from a good machine and still nothing. And the ones from this machine work in the other machine?
Glass under the dev/unit unit is clean.
Is the DV unit turning? Sounds like you lost drive to the DV unit.
Found the problem. The yellow developing unit did not latch properly on this one. Fixed and making yellow now.
That little gray button on the developer will get you every once in a while.
If i get "white eagle on white paper", i remove the MC at first to see if i get solid color on DK unit without MC.
(On systems with aSi DKs you has to set U100/ AC "auto adjust" to "OFF" before, to prevent C510x/ OPC not needed)
Still blank--> HVT DV, no contact between DV<-->DK (grey hook), DV don`t turn...
Bookmarks