Question will the M3145idn with a added IB-51 work with Pin Point scan. I can not seem to Pin Point scan to connect using the wireless card. I have set machines up with Pin Point that have a wireless internal installed and they work great but never a IB-51.
I am thinking this is just a print server, but others said it does not say that anywhere.
Anyone ever done this? Thanks
Last edited by kuby; 06-16-2021 at 01:53 AM.
OK found out from Kyocera that the IB-51 is not Hypas compatible.
They were going to put the printer where there is not ethernet port of the wall. Been trying to get them to have us install a drop there.
From what I have read on this forum, a cheap wireless router will outperform almost any of these wireless cards.
When you think you have made a procedure idiot proof your company employs a better idiot.
Just about any wireless bridge is what you want. The IB-51 would only be needed if it were going to access two networks simultaneously, IMO.
Found out from Kyocera that the IB-36 will work with Hypas. That is what they decided to do.
does this machine not have wireless already onboard
No the machine is a idn, no wireless card.
I have encountered way too many problems with the IB-50 and IB-51.
When I have to do wireless on a machine without wireless built in, I use a TP-Link AC750 Wireless Portable Nano Travel Router. Cheap and flexible and dependable. Just a suggestion.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks