Thanks:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 26
USB Host on Kyocera Taskalfa series
On the datasheet of Kyocera TA 3212i and other Kyocera TASKalfa series, it’s written Standard interface: USB 2.0 (Hi-Speed) and 4 x USB Host Interface, can someone show me the 4 x USB Host on the machine?
image004.jpgimage001.jpg
Waiting for your feedback.
Thanks.
Last edited by brunot; 09-19-2021 at 07:21 PM.
-
Re: USB Host on Kyocera Taskalfa series
What you're looking at and next to Ops panel are all I know of.
-
Re: USB Host on Kyocera Taskalfa series
They are under a cover behind the operation panel. There is a small USB hub.
In the SM, look for the instructions to install a Keyboard or Card Authentication kit (Installation 2-28):
Flip Op panel up and on the backside remove op panel lower cover. (over hinge)
Remove Card Reader cover (Fr-Top-R glossy semi transparent) by pulling bottom R corner outward (release lower tabs) and pushing to the left.
Look in cavity at right side.
Last edited by PrintWhisperer; 09-19-2021 at 08:43 PM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks