Results 1 to 8 of 8
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2019
    Location
    gauteng
    Posts
    60
    Rep Power
    6

    Kyocera 2554 machine failure

    Good morning

    we currently have a Kyocera 2554 that keeps giving machine failure C7301 we have replaced the complete toner hopper assembly and a week later the error is back , anything else you guys are aware of that could be causing this issue , any advice is welcome

  2. #2
    Senior Tech 1,000+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    1,062
    Rep Power
    42

    Re: Kyocera 2554 machine failure

    Check wiring and make sure that connections are secure. Firmware up to date. Image drive PWB. Engine PWB.

  3. #3
    Master Of The Obvious 10,000+ Posts
    Kyocera 2554  machine failure

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,874
    Rep Power
    383

    Re: Kyocera 2554 machine failure

    Quote Originally Posted by kuby View Post
    Check wiring and make sure that connections are secure. Firmware up to date. Image drive PWB. Engine PWB.
    +1
    The manual also refers to feed image PWB. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Feb 2018
    Location
    Wild West
    Posts
    132
    Rep Power
    16

    Re: Kyocera 2554 machine failure

    +2 on Firmware and not over KFS unless you read the release notes (so FUBAR)

    U135 -> Check Toner motor operation (do not drive for too long) and check for (k) sensor value change.

    HOP_PLS_BK is YC11 pin5 of...Image Drive PWB (sry BC)

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jun 2019
    Location
    gauteng
    Posts
    60
    Rep Power
    6

    Re: Kyocera 2554 machine failure

    Quote Originally Posted by PrintWhisperer View Post
    +2 on Firmware and not over KFS unless you read the release notes (so FUBAR)

    U135 -> Check Toner motor operation (do not drive for too long) and check for (k) sensor value change.

    HOP_PLS_BK is YC11 pin5 of...Image Drive PWB (sry BC)


    Thank you that was our next option

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Jun 2019
    Location
    gauteng
    Posts
    60
    Rep Power
    6

    Re: Kyocera 2554 machine failure

    tried all suggestions but still no luck .............

  7. #7
    Senior Tech 100+ Posts
    Kyocera 2554  machine failure


    Join Date
    Aug 2008
    Location
    Seattle
    Posts
    202
    Rep Power
    30

    Re: Kyocera 2554 machine failure

    Any solution? Same symptom at a little over 4,000 prints, C7301

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Feb 2018
    Location
    Wild West
    Posts
    132
    Rep Power
    16

    Re: Kyocera 2554 machine failure

    Quote Originally Posted by nathicana View Post
    Any solution? Same symptom at a little over 4,000 prints, C7301
    This one is getting funky. If you are authorized, have your manager call the Kyo rep because that hop_pls_bk signal needs checking while running U135 along with some other signals like Hopper full.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here