Can we adjust print position/ print margins or leading edge and side to side registration adjustment in kyocera 5500i as we can did in Ricoh?
Kindly help
Can we adjust print position/ print margins or leading edge and side to side registration adjustment in kyocera 5500i as we can did in Ricoh?
Kindly help
034 - start position - l cassette
also start position 3/4 - l cassette
A little bit of a cheat really just moves the whole image over. The only way I've found to affect print jobs
This is the only hardware level page adjustment and it will affect your copies the same as prints, and only has about 3mm of adjustment in each direction.
Print margins are APPLICATION controlled. Page Setup options appear in most applications for setting margins and if they do not then your application sucks.
Only when the application sends NO PCL/PS margin commands, can the margins be set by default printer settings via FRPO.
To determine this you will have to do a data-capture and examine the file with EscapeE to see if it has margin commands in it.
Look at U402 before you adjust the LSU in U034.
I usually just look at my service manual. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks