Good morning
I have a TA520i that is smudging / smearing the text/image in certain places , i have tried another drum unit and developer unit but has made no difference see attached sample
Good morning
I have a TA520i that is smudging / smearing the text/image in certain places , i have tried another drum unit and developer unit but has made no difference see attached sample
Is this made off the glass or through the ADF?
This might be a long shot but I have seen it before.
Is the left side cover latching when closed? Many times when someone closes that left side cover, they may push it closed on the front side not in the middle. The cover may look closed but its not latched in the back.
Just a thought.
Last edited by Samanator; 10-14-2021 at 11:41 PM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks