Hello,
I’ve got a 5052 jamming out of tray 3&4 of LCF before going into the Fuser. No page wrinkling or folding at the fuser it simply appears it just stopped. Machine prints just fine from trays 1,2,and Multipurpose tray. Any help would be appreciated!
even if it's not that precise code
J1403/J1404 Conveying sensor non-arrival
jam
Object: Paper feeder or Large capacity feeder
Condition: There is a damage on paper. (Paper is
caught. Conveying capability is decreasing. Or,
paper is slipping.)
J1403/J1404 Conveying sensor non-arrival
jam
Object: Paper feeder or Large capacity feeder
Condition: There is no damage on paper. (Feed
drive does not start. Or, conveying clutch does
not operate correctly.)
i think
You might take a look at the sensor just past the second transfer roller. Which name do you like?:
belt winding sensor
belt wound sensor
belt roll-up sensor
PARTS SENSOR OPT. SP 303NW94060
Yes, they are all the same single sensor. Kyocera just cannot seem to make up it's mind what to call it.
No, actually, I understand that different teams of writers prepare different parts of the manual, and they don't always translate the same word, the same way.
You can check the sensor operation in U031 [BELT SENSOR]. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Sounds crazy stupid to me 😀Originally Posted by blackcat4866
You omit the middle part and end up with just belt sensor.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
LOL! =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Check for intermittent varying registration and go after the clutch Avio mentioned.
"Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks