Working on a Kyocera Taskalfa 5052ci with inner finisher and it displayed a "close bridge unit door" message despite not having one. Replaced the Feed image PWB and that resolved the issue.
Working on a Kyocera Taskalfa 5052ci with inner finisher and it displayed a "close bridge unit door" message despite not having one. Replaced the Feed image PWB and that resolved the issue.
Last edited by dantab1980; 11-16-2021 at 07:01 PM.
Wow! That was a weird one!! Thanks for the share
Where the inner finisher connects to the machine, put some washers under the connector to space the connector out and make a tighter fit against the machine.
I have had all sorts of issues with the inner finishers and its mostly been caused by the connector not making a good enough connection
Bookmarks