Our Taskalfa 300ci misses color in vertical lines when scanning. The problem occurs both through the feeder and the flatbed.
We have cleaned the glass thoroughly and prints are just fine.
Thanks in advance
300ci.jpg300ci1.jpg
Our Taskalfa 300ci misses color in vertical lines when scanning. The problem occurs both through the feeder and the flatbed.
We have cleaned the glass thoroughly and prints are just fine.
Thanks in advance
300ci.jpg300ci1.jpg
Are you going to ignore the previous responses to your question in the previous thread(s) that you started?
Does this remind you?:
https://www.copytechnet.com/forums/k...t=#post1966338
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi,
no I'm not ignoring the responses, that problem seems to be linked to the settings of the copier, as it was fixed by the tip of changing the settings.
The other printer only had problems with the dotted lines on the font list, this printer has problems with everything.
Thanks
Bookmarks