Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Senior Tech 250+ Posts Ropariva's Avatar
    Join Date
    Mar 2016
    Posts
    324
    Rep Power
    21

    Re: Kyocera M5526cdn problem with printing

    Quote Originally Posted by Tsakirtas View Post
    Would it be possible to print copies without problem with a damaged tranfer belt?

    The problem appeared after the use of Genuine kyocera toners.
    I just bought a set of compatible, because the printer did not work properly.
    Yes. The belt will be fine. Itís the auger that removes the waste toner that seizes up and rounds off the shaft inside the gear. Itís probably already done that, but I wouldnít do any more prints till till itís been removed and cleaned out and checked to be rotating. If youíve only done 7 k you may be lucky and the drum might be ok, but the waste from the TR belt also travels through the drums auger.
    Sometimes you just need the transfer belt, sometimes tr belt and drum. Depends whatís damaged.

  2. #22
    Senior Tech 250+ Posts Ropariva's Avatar
    Join Date
    Mar 2016
    Posts
    324
    Rep Power
    21

    Re: Kyocera M5526cdn problem with printing

    Quote Originally Posted by Tsakirtas View Post
    Would it be possible to print copies without problem with a damaged tranfer belt?

    The problem appeared after the use of Genuine kyocera toners.
    I just bought a set of compatible, because the printer did not work properly.
    PS. I also hate generic toners with a passion, but this issue can and does also occur with genuine.

  3. #23
    Master Of The Obvious 10,000+ Posts
    Kyocera M5526cdn problem with printing

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    20,244
    Rep Power
    398

    Re: Kyocera M5526cdn problem with printing

    There have been updates to the primary transfer belt unit. If this is the original one, it's common to have belt cleaning issues.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here