kyocera taskalfa 7052ci blurred image in printing + copying

[Ropariva]

Hello everyone ,

I have a copier that prints blurred footers in A4 portrait
look at the attached documents

the LSU has been changed but the problem is the same

the machine is up to date for the firmware
I recalibrated it
for the black it s ok, but yellow, magenta, cyan no
if you have an idea ? thank you

I’ve got more questions than answers. You say that’s the footer. So is that the trail edge out that is blurred? Or is it one side?
Some more/better examples might help. How many prints? Happening on all colours ?

[pascalb.]

hello,

Maybe the lasers should be reset?
U467 / Color Regist switch to Off
switch off /on, the machine.
return to U467 / Color Regist reset to On
then do a Color Registration manual in System menu.
good luck.

[PrintWhisperer]

hello,

Maybe the lasers should be reset?
U467 / Color Regist switch to Off
switch off /on, the machine.
return to U467 / Color Regist reset to On
then do a Color Registration manual in System menu.
good luck.

Winner winner chicken dinner, nice recall.

First time seeing this on a "2" series (many '3' series Hi-volume have had this problem). In MM467 it's 'Auto Color Regist' and it gets scrambled data so the above will reset the values.

Remember all colors reference black base value so black isn't affected.

[rickirobert]

Hi all,

I thank Pascal who knows these machines perfectly and following his precious help everything is ok