Has anyone seen this error code? I've tried a spare transfer belt, removed the toner supply drive, vacuumed it out, and made sure it isn't bound up with toner. Is it possible the Toner Supply Drive Unit needs to be replaced?
Thank you
Thanks: 0
Likes: 0
Dislikes: 0
Has anyone seen this error code? I've tried a spare transfer belt, removed the toner supply drive, vacuumed it out, and made sure it isn't bound up with toner. Is it possible the Toner Supply Drive Unit needs to be replaced?
Thank you
I've seen two things cause this. A fault in the toner supply unit (from the bottle to the dev unit) and a broken auger in the developer unit.
So, darry1322, what did you do to fix it?
Replaced the toner supply unit or the developer depending on which was faulty.
You can rotate the developer unit by hand and watch if the developer auger is turning.
So what model was this? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
CS 5002i
sorry, but why open new treads on topics already discussed?
I suggest using the search function before open new tread.
To each his own, my friend.
Reply With Quote
Bookmarks