Results 1 to 7 of 7
  1. #1
    Technician diwakar's Avatar
    Join Date
    Aug 2019
    Location
    Delhi
    Posts
    33
    Rep Power
    7

    kyocera 2040 middle band issue

    hi all

    there is a strange issue with our kyocera 2040

    after 10 prints, a black band of small horizontal lines is coming. please refer to the attached pic.

    any guidance will be much appreciated
    WhatsApp Image 2022-09-08 at 12.03.11.jpg

  2. #2
    Trusted Tech 50+ Posts rapo_tech's Avatar
    Join Date
    Feb 2019
    Location
    Tartu linn
    Posts
    95
    Rep Power
    10

    Re: kyocera 2040 middle band issue

    Probably fuser belt cracked... Fuser unit needs to be replaced.

    If itś jamming also, its most definatly bad fuser.

  3. #3
    Field Supervisor 500+ Posts ntbann's Avatar
    Join Date
    Jan 2012
    Location
    Port Huron
    Posts
    513
    Rep Power
    32

    Re: kyocera 2040 middle band issue

    That to me looks like drum charge issue.

  4. #4
    Master Of The Obvious 10,000+ Posts
    kyocera 2040 middle band issue

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    21,331
    Rep Power
    427

    Re: kyocera 2040 middle band issue

    It would probably help to know which direction the paper was feeding. Horizontal & vertical designations are meaningless ... as are portrait and landscape. Both describe the orientation of the image on the paper, not the orientation of the paper in the machine.

    Try "feed" & "crossfeed" for clarity. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Technician trunghuynh20202020's Avatar
    Join Date
    Oct 2021
    Location
    Nha Trang Khanh Hoa
    Posts
    15
    Rep Power
    3

    Re: kyocera 2040 middle band issue

    hello , our region is also experiencing this strange thing , all happens with model ecosys m2040dn , P2040dn , P2235dn , the more prints and prints, the more cyclical black streaks appear, both side 1 and side 2 , like the mc high voltage drop during machine operation , anyone has a useful solution , thank you very much
    Attached Images Attached Images

  6. #6
    Senior Tech 100+ Posts
    kyocera 2040 middle band issue


    Join Date
    Oct 2021
    Location
    Altoona PA
    Posts
    103
    Rep Power
    4

    Re: kyocera 2040 middle band issue

    This machine runs 8 1/2" wide only

    Looks to me like a drum issue, might want to call a tech to assist you.

  7. #7
    Technician trunghuynh20202020's Avatar
    Join Date
    Oct 2021
    Location
    Nha Trang Khanh Hoa
    Posts
    15
    Rep Power
    3

    Re: kyocera 2040 middle band issue

    i think i'm getting high voltage error, the more phony and printing more black prints, counter 22k , i don't know if there is any service message board about this, any comments i'm very grateful

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here