Image is light about 4cm at one side in the direction of paper move. Any idea?
Image is light about 4cm at one side in the direction of paper move. Any idea?
A sample would be most helpful
Need more info. Do you have the same problem when printing and copying?
Also, what have you done to try to correct the problem?
Growth is found only in adversity.
Check the transfer belt, they sometimes shift and cause blank/light areas, also check the charge roller, they are cleanable ( damp lint-free cloth) or if it's in bad shape change it if you can. Also check the developer unit , the dev roller gets worn and causes quality issues. Hope this helps!
Could be dirty polygon mirror tips.
Bookmarks