When make a copy the first page is ok the second few dark lines , third page has a lot of wider dark lines.
The lines are not look from drum .Charge roller is new ,Performed dev initialazation, drum refresh ,calibration with no result. Any idea?
When make a copy the first page is ok the second few dark lines , third page has a lot of wider dark lines.
The lines are not look from drum .Charge roller is new ,Performed dev initialazation, drum refresh ,calibration with no result. Any idea?
samples?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
hmmm, do you have any samples?
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
It looks like the same problem I have noticed when using compatible toners.
You can go to sim 147 and change the mode setting to 0 instead of 1
This setting will use less toner
or you can change to OEM toners, but maybe you will still need to change mode setting to 0 if the developer
unit is contaminated enough from the compatible toner previously
Bookmarks