Results 1 to 4 of 4
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    582
    Rep Power
    0

    taskalfa 5501i error F000

    I have those 2 machines.
    |In First machine i removed the controller and put it back and this error appears
    In second machine i removed ram dimm and eprom to use it in other machine and then i put them back and error appears
    I can noy get in service mode 18781878 and i can not load firmware. Any idea?

  2. #2
    IT Manager 10,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Biden 2024
    Posts
    25,653
    Rep Power
    331

    Re: taskalfa 5501i error F000

    open the front door than try the service mode

  3. #3
    Senior Tech 250+ Posts PrintWhisperer's Avatar
    Join Date
    Feb 2018
    Location
    Wild West
    Posts
    431
    Rep Power
    29

    Re: taskalfa 5501i error F000

    F000 Failure in Communication between OP Panel CPU and Main. Check SATA interace cable.

    Can occur by corruption of firmware when swapping Main PWB and EEPROM.

    Find EEPROM original to machine and place in MAIN PWB if possible.

    Typically corruption must recovered by incremental firmware load beginning with Op Panel Main PWB boot load via small switch on underside of Op Panel PWB.

    Then load MMI firmware alone, then Main Firmware alone, then full firmware.

    Or replace with new uncorrupted Op Panel and Main PWB as combo.

    Or use as boat anchor.
    "Being ignorant is not so much a shame, as being unwilling to learn" - Benjamin Franklin

  4. #4
    Senior Tech 250+ Posts
    taskalfa 5501i error F000

    copydocinc's Avatar
    Join Date
    Mar 2015
    Location
    Bountiful, Utah
    Posts
    256
    Rep Power
    22

    Re: taskalfa 5501i error F000

    Quote Originally Posted by Gab View Post
    I have those 2 machines.
    |In First machine i removed the controller and put it back and this error appears
    In second machine i removed ram dimm and eprom to use it in other machine and then i put them back and error appears
    I can noy get in service mode 18781878 and i can not load firmware. Any idea?
    You could try the correct numbers to get into service mode. The numbers you are using are incorrect.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here