Hello Everyone,
Can anyone tell me what, exactly, is it in the Kyocera 8002i Fuser that causes paper to stick, or wrap itself within the Fuser, and "accordian" each sheet of paper behind it in the Fuser? It is very difficult to remove the jammed paper without damaging the rollers.
In the Fuser, there is a thin, brass looking plate, that I'm assuming acts as a guide for the paper. Also, on the underside of the Fuser, there is a black strip of paper. Is the jammed paper deforming either of these parts, and causing the "pile-up" of paper in the Fuser?
The event log usually shows this jam in the J42XX range.
Your thoughts?
Bookmarks