Thanks: 
Likes: 
Dislikes: Good evening, I have this aforementioned machine with the problem that on the upper side it prints well on the lower side
instead the print comes out lighter, with all the colours, has anyone ever had this problem? Thanks.
Good evening, I have this aforementioned machine with the problem that on the upper side it prints well on the lower side
instead the print comes out lighter, with all the colours, has anyone ever had this problem? Thanks.
look at the secondary transfer roller for any mechanical defect
It seems to affect all colors equally ... is that true?
It might help to see a pattern like this:
=^..^=
Last edited by blackcat4866; 01-31-2023 at 08:05 PM.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I agree with sparky that it's most likely the secondary transfer roller. I also agree with blackcat that it would be most helpful to see some solid patterns. The sample page that the OP posted doesn't give much to go on.
Growth is found only in adversity.
Could it be LSU mirror tips?
Immagine WhatsApp 2023-02-02 ore 09.17.31.jpg
I think the problem is this part
Reply With Quote
Bookmarks