Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. #11
    Junior Member
    Join Date
    Jan 2021
    Location
    Lahore
    Posts
    7
    Rep Power
    0

    Re: Kyocera Taskalfa 4500i Error Code C7460

    Quote Originally Posted by blackcat4866 View Post
    Do you have any bent pins in the union connector? =^..^=
    Gentlemen thanks for your suggestion but sorry to say i am beginner at this time. I can't understand what you want to ask in the above text. I am facing this error "code C7460 exit the developer waste" in my photocopy machine "copystar CS5501i" when i return On the machine the error occurs. Sir i think there is some dust that blocking the sensor in developer unit. @copymech said that "the error code refers to the toner shutter. There is a sensor in the hopper that gets toner on it and will sense the shutter closed. shutter is moved to the right and secured with a screw at set up". i request to you guide me in step by step what i do to fix it. I very thanks full for your great effort.

  2. #12
    Master Of The Obvious 10,000+ Posts
    Kyocera Taskalfa 4500i Error Code C7460

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Kyocera Taskalfa 4500i Error Code C7460

    I recommend that you get yourself a service manual and do some reading.

    Is language the issue? If you aren't technologically savvy enough to do this, I don't see how I can help you through this text window.

    I'll go this far, here are some photos that you will find on page 639 of the service manual.:

    Open Door.jpgUnion Connector.jpg

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #13
    Junior Member
    Join Date
    Jan 2021
    Location
    Lahore
    Posts
    7
    Rep Power
    0

    Re: Kyocera Taskalfa 4500i Error Code C7460

    Quote Originally Posted by blackcat4866 View Post
    I recommend that you get yourself a service manual and do some reading.

    Is language the issue? If you aren't technologically savvy enough to do this, I don't see how I can help you through this text window.

    I'll go this far, here are some photos that you will find on page 639 of the service manual.:

    Open Door.jpgUnion Connector.jpg

    =^..^=
    Sir you are the great, now i understand your question. No sir i don't have any bent pins in the union connector. sir i attached the error occurred picture, guide me how to fix this error thanks.
    error image1.jpgImage.jpg

  4. #14
    Master Of The Obvious 10,000+ Posts
    Kyocera Taskalfa 4500i Error Code C7460

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Kyocera Taskalfa 4500i Error Code C7460

    This error points to the developer shutter sensor DEVSS. It's a photosensor, and probably has toner in it.

    This is how you remove the hopper:

    Hopper.jpg

    Here is the location of the sensor. You can clean it with canned air or a toothbrush.:

    DEVSS.jpg

    Remind me again: Why am I reading the manual to you? You can read, correct? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #15
    Junior Member
    Join Date
    Jan 2021
    Location
    Lahore
    Posts
    7
    Rep Power
    0

    Re: Kyocera Taskalfa 4500i Error Code C7460

    Quote Originally Posted by blackcat4866 View Post
    This error points to the developer shutter sensor DEVSS. It's a photosensor, and probably has toner in it.

    This is how you remove the hopper:

    Hopper.jpg

    Here is the location of the sensor. You can clean it with canned air or a toothbrush.:

    DEVSS.jpg

    Remind me again: Why am I reading the manual to you? You can read, correct? =^..^=
    yes the read your instruction correctly. after applying these instruction i will contact you soon and share the result.

  6. #16
    Senior Tech 100+ Posts
    Kyocera Taskalfa 4500i Error Code C7460


    Join Date
    Aug 2009
    Location
    Montrose, Calif.
    Posts
    174
    Rep Power
    31

    Re: Kyocera Taskalfa 4500i Error Code C7460

    poor fella.. id be just as clueless if i was expected to speak and function in Swahili

  7. #17
    Technician KyoServiceManager's Avatar
    Join Date
    Oct 2017
    Location
    Greenville
    Posts
    30
    Rep Power
    14

    Re: Kyocera Taskalfa 4500i Error Code C7460

    I have attached the section of the service manual that shows the developer locking mechanism in case there was continued confusion on the location of the DV Shutter.
    Attached Files Attached Files

  8. #18
    Junior Member
    Join Date
    Jan 2021
    Location
    Lahore
    Posts
    7
    Rep Power
    0

    Red face Re: Kyocera Taskalfa 4500i Error Code C7460

    Quote Originally Posted by blackcat4866 View Post
    This error points to the developer shutter sensor DEVSS. It's a photosensor, and probably has toner in it.

    This is how you remove the hopper:

    Hopper.jpg

    Here is the location of the sensor. You can clean it with canned air or a toothbrush.:

    DEVSS.jpg

    Remind me again: Why am I reading the manual to you? You can read, correct? =^..^=
    hey i clean the hopper unit now i got a new error that is "C3300", please tell me what is this error and how to i fix it?.Thanks
    i am waiting your response tell me about this as soon as possible.

  9. #19
    Service Manager 10,000+ Posts
    Kyocera Taskalfa 4500i Error Code C7460

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    13,375
    Rep Power
    448

    Re: Kyocera Taskalfa 4500i Error Code C7460

    3300 Optical system (AGC) error
    One of the gains is FF or 00
    during the CCD lamp AGC is
    being processed.
    LED lamp PWB

    1. To check the lamp, execute U061 CCD
    (see page 1-3-149).


    2. Confirm that the wiring connector is
    firmly connected and, if necessary,
    connect the connector all the way in.
    LED lamp PWB and ISC PWB (YC6)
    CCD PWB (YC2) and ISC PWB (YC9)
    ISC PWB (YC3) and Main PWB (YC11)


    3. If the wiring is disconnected, shorted or
    grounded, replace the wiring.


    4. If the LED lamp won’t light, replace the
    LED PWB and execut U411 (see page
    1-3-149).
    CCD PWB Replace the ISU and execute U411 (see
    page 1-3-149).
    ISC PWB Replace the ISC PWB and execute U411
    (see page 1-3-149).
    Main PWB Replace the main PWB (see page 1-5-58).

  10. #20
    Junior Member
    Join Date
    Jan 2021
    Location
    Lahore
    Posts
    7
    Rep Power
    0

    Re: Kyocera Taskalfa 4500i Error Code C7460

    Quote Originally Posted by BillyCarpenter View Post
    3300 Optical system (AGC) error
    One of the gains is FF or 00
    during the CCD lamp AGC is
    being processed.
    LED lamp PWB

    1. To check the lamp, execute U061 CCD
    (see page 1-3-149).


    2. Confirm that the wiring connector is
    firmly connected and, if necessary,
    connect the connector all the way in.
    LED lamp PWB and ISC PWB (YC6)
    CCD PWB (YC2) and ISC PWB (YC9)
    ISC PWB (YC3) and Main PWB (YC11)


    3. If the wiring is disconnected, shorted or
    grounded, replace the wiring.


    4. If the LED lamp won’t light, replace the
    LED PWB and execut U411 (see page
    1-3-149).
    CCD PWB Replace the ISU and execute U411 (see
    page 1-3-149).
    ISC PWB Replace the ISC PWB and execute U411
    (see page 1-3-149).
    Main PWB Replace the main PWB (see page 1-5-58).
    Hey please share the book that you mention and also guide me step by step how to fix it.
    Thanks.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here