Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    ZIMBABWE
    Posts
    68
    Rep Power
    0

    Kyocera km3050,"loading program"

    HI GUYS,im here again with that problem of my machine kyocera km3050,i have downloaded the service manual of the machine and was going through the manual i did get the page which talks about the firmware update,if i switch on the machine it shows a massage,"LOADING PROGRAM"and it remains like that,please help im stranded.is there any other ways of updating the firmware?

  2. #2
    Senior Tech 100+ Posts alamsandhu's Avatar
    Join Date
    Jun 2010
    Location
    Doha
    Posts
    202
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    Quote Originally Posted by RWAFA View Post
    HI GUYS,im here again with that problem of my machine kyocera km3050,i have downloaded the service manual of the machine and was going through the manual i did get the page which talks about the firmware update,if i switch on the machine it shows a massage,"LOADING PROGRAM"and it remains like that,please help im stranded.is there any other ways of updating the firmware?
    reconnect the DIMM memories of panel and Main board. then try to update. also check the main board may b some ICs damaged due to electrical fluctuation if using Generator.
    M.alam

  3. #3
    Master Of The Obvious 10,000+ Posts
    Kyocera km3050,"loading program"

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    18,534
    Rep Power
    322

    Re: Kyocera km3050,"loading program"

    What method are you using to load the firmware? Compact Flash or USB?

    If CF,
    1) have you formatted the card on a FalconIII machine?
    2) have you extracted the firmware and copied it to the root of the drive?

    If USB,
    1) is it 500MB or less in size, without other files or programs running?
    2) is the firmware extracted and copied to the root of the drive?

    Once the memory is prepared:
    1) is the machine turned completely off before installing the memory?

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Trusted Tech 50+ Posts
    Kyocera km3050,"loading program"


    Join Date
    Aug 2007
    Location
    Miami, FL
    Posts
    64
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    let me know you email. I will send you the firmware

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Aug 2011
    Location
    ZIMBABWE
    Posts
    68
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    Quote Originally Posted by Rolandito View Post
    let me know you email. I will send you the firmware
    ,MY EMAIL IS rwafawilson@yahoo.com,will be very glad to receive the firm ware,thnkx in advance.

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    Aug 2008
    Location
    Glen Ellyn, IL.
    Posts
    58
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    Can anyone sell or send me KM5050 Firmware. My email is raschk@sbcglobal.net

  7. #7
    Trusted Tech 50+ Posts
    Kyocera km3050,"loading program"


    Join Date
    Aug 2007
    Location
    Miami, FL
    Posts
    64
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    done....share it by my google drive

  8. #8
    Trusted Tech 50+ Posts
    Kyocera km3050,"loading program"

    RollingROARANDA's Avatar
    Join Date
    Nov 2012
    Location
    Friendswood,TX
    Posts
    72
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    Just unzip the firmware to a blank FAT32 usb drive ( I've done plenty of these for Kyocera) , it will create a folder on your usb drive containing the firmware files. Open that folder, press Ctrl+A on your keyboard, for Select All, Cut, and navigate to the root of the drive , Paste..
    Delete the empty folder on the drive. Safely eject it. Turn the main power off on the machine. Plug in the USB drive on either the side of the panel or the USB port on the back, either way, and then turn the main power on the copier. It should start updating automatically, and it will stop at a screen informing you of the update results. Power off machine. Unplug USB drive. Power On.

    If the machine still doesn't get past Program Loading, after firmware update, I remember one of my buddies fixed this by re seating dimms or something like that. Sorry I cant be more specific, I only do firmware, hdd, network scan, and print driver issues, and HyPAS, etc...

  9. #9
    Trusted Tech 50+ Posts
    Kyocera km3050,"loading program"

    RollingROARANDA's Avatar
    Join Date
    Nov 2012
    Location
    Friendswood,TX
    Posts
    72
    Rep Power
    0

    Angry Re: Kyocera km3050,"loading program"

    I might just give everyone on this thread firmware, I tried to play nice and help Paul, but he snatched up all my Rep power for some stoopid reason. If he only knew half the *** I fix in a day.

  10. #10
    Trusted Tech 50+ Posts
    Join Date
    Aug 2008
    Location
    Glen Ellyn, IL.
    Posts
    58
    Rep Power
    0

    Re: Kyocera km3050,"loading program"

    Thanks rolandito for the firmware. I'm usually a Toshiba guyif you need anything like firmware or manuals let me know.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here