Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    cdllt
    Guest

    Help: Kyocera KM-C2030 setting up Network

    Hi everyone,
    I am kinda new with this hope I can find handy from expert here

    I setting up this copier machine and found this instruction on the net as follow:

    Press the utility button on the control panel
    In the touch panel press the controller detail button
    Press the menu button
    Use the down arrow button to scroll to run setup
    Select Network setup
    Select Ethernet in the port setup menu
    Select TCP/IP in protocol setup
    you should have acces to IP configuration
    I saw the button "controller detail button" when I select Network setup the whole screen is frozen so I end up to restart the machine( switch off power button), when I come back and did not see "controller detail button" any more! I try to reset the machine as I found it here
    CF2002 with Error 3C50

    but I still can not find the button "controller detail " anywhere! Can anyone help please!

  2. #2
    Service Manager 5,000+ Posts
    Help: Kyocera KM-C2030 setting up Network


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: Help: Kyocera KM-C2030 setting up Network

    RTFM

  3. #3
    Field Supervisor 500+ Posts
    Help: Kyocera KM-C2030 setting up Network


    Join Date
    Oct 2010
    Posts
    815
    Rep Power
    45

    Re: Help: Kyocera KM-C2030 setting up Network

    Make sure you're waiting long enough after the copier boots. The controller can take some time to boot after the copier comes ready.

  4. #4
    cdllt
    Guest

    Re: Help: Kyocera KM-C2030 setting up Network

    Hi JustManuals.com
    what are you trying to say?



    Quote Originally Posted by darry1322 View Post
    Make sure you're waiting long enough after the copier boots. The controller can take some time to boot after the copier comes ready.
    I leave the machine ON since yesterday, today I tried again still not see the controller button. Is there any other way to bring back this button? I need it badly for setting up the network.

  5. #5
    Technician
    Join Date
    Mar 2010
    Posts
    30
    Rep Power
    29

    Re: Help: Kyocera KM-C2030 setting up Network

    Does it have Fiery controller?? If so, bad controller or the HDD is bad. replace with a 2.5 in laptop driver and reload firmware through a centronics cable.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here