Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    706
    Rep Power
    36

    Question CS8000i losing its settings? And a maintenance message question?

    We have a CS 8000i here in the shop with an interesting problem. If you power off the machine or sleep it over night, when it boots back up it has an error code of C0180 which points to an eeprom code. Along with that it goes back to metric and the destination model goes to Taskalpha. After swapping out boards to troubleshoot with no luck. We tried the battery for s&g, now we get an 0840 code and the clock and times reset. We can reset all the errors but when you power off over night or a few hours the problem reoccurs. So I'm leaning toward bad main pwb eeprom and code dimm. Anyone else run into a problem like this?

    Also there is a message about "Time for Maintenance (T)" on the display.. What is that? All the maintenance counters have been cleared after we PMed the machine and changed all the feed rollers. Can't find anything about it in the SM.

    Thanks

  2. #2
    Senior Tech 100+ Posts copymech's Avatar
    Join Date
    Sep 2011
    Location
    Little Rock
    Posts
    196
    Rep Power
    28
    you probably have a dead eprom battery. just like on a PC.
    the maint t is a erronious code. we believe that is is caused by a loss of network time sync. it is removed by doing a 906 reset.

  3. #3
    Technician
    Join Date
    Dec 2011
    Location
    Texas
    Posts
    44
    Rep Power
    25

    Re: CS8000i losing its settings? And a maintenance message question?

    Maint T is a time thing...go into sim 278 and turn it off..I think you have to 906 reset afterwards

  4. #4
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    706
    Rep Power
    36

    Re: CS8000i losing its settings? And a maintenance message question?

    Quote Originally Posted by tedtech View Post
    Maint T is a time thing...go into sim 278 and turn it off..I think you have to 906 reset afterwards
    278 set delivery date? It was blank.. So I punched in a date. Did a 906. Reboot.. Maint. T still there, now has 0840 code again but time is set correctly on display.

  5. #5
    Ghoulscout 500+ Posts Kidaver's Avatar
    Join Date
    Apr 2011
    Location
    Texas
    Posts
    912
    Rep Power
    45

    Re: CS8000i losing its settings? And a maintenance message question?

    I talked to a Kyo rep about the time for maint T and as far as he could tell me it has to do with times syncing up and such...having a bad eeprom battery or other issues causing your time to be out of whack would probably cause that. I've seen it on lots of machines but I have never seen it affect anything.
    "In a cruel and evil world, being cynical can allow you to get some entertainment out of it."

  6. #6
    Senior Tech 100+ Posts copymech's Avatar
    Join Date
    Sep 2011
    Location
    Little Rock
    Posts
    196
    Rep Power
    28
    0840 code. fix is to replace the battery.

  7. #7
    Super Tech 500+ Posts CompyTech's Avatar
    Join Date
    Feb 2011
    Location
    MS
    Posts
    706
    Rep Power
    36

    Re: CS8000i losing its settings? And a maintenance message question?

    After everything we did, new EEPROM chip solved the problem...

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Apr 2013
    Location
    manama
    Posts
    94
    Rep Power
    23

    Re: CS8000i losing its settings? And a maintenance message question?

    for the time for maintenance error.. simulation 250 preset the counter... then go with 906 reset the disable funtion..!!

  9. #9
    Senior Tech 250+ Posts madas's Avatar
    Join Date
    Aug 2008
    Location
    NZ
    Posts
    313
    Rep Power
    35

    Re: CS8000i losing its settings? And a maintenance message question?

    Maintenance T, do a firmware update then 906 that should cure it, I seem to remember it was to do with the fax time? correct me if I am wrong. that is if this has a fax option? been a long time and i dont have the bulletin.

    If the eeprom cured all this may be of use for the future.

    madas

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here