2550ci fuser "squeak"

[cbs]

A 2550ci in the field is squeaking "lightly" but loud enough to aggrevate the staff. It's coming from the fuser section as it continues to turn after copying/printing. Any suggestions for grease types or other work arounds for this issue? I've been careful not to use the wrong type of grease/lubricants on these new fuser sections.

[kyrenecopy]

go to system menu
adjustment/maintainence
silent mode
ON

and you can try lubing the fuser bushing/bearings with hi temp grease

[linuxgyro]

are you sure its from the fuser? i had an annoying squeak coming from the fuser drive section. i pulled it apart and there was a nylon washer that was grooved by a spring. i flipped it around hit it with some grease and the sound has not returned.