Thanks:
0
Likes:
0
Dislikes:
0
-
Superfreak
- Rep Power
- 40
CS-1510 and CS-1810 Lasers
Does any one fix the 1510-1810 laser units. I have cleaned a few out and sometimes that works for a month. TIA
-
Service Manager
100+ Posts
- Rep Power
- 39
Re:CS-1510 and CS-1810 Lasers
Hytec Dealer Services does. www.repairpcb.com. I also make sure that the fan vents stay clean front and rear. Seems to help some. We instruct our key ops to check them every toner change. They can use an old stiff paint brush to clean them out.
Post edited by: dbrownlee, at: 2006/01/26 05:23
-
Technician
- Rep Power
- 39
Re:CS-1510 and CS-1810 Lasers
i dont have many of these and none are a problem. is this a comon problem?
-
Service Manager
100+ Posts
- Rep Power
- 39
Re:CS-1510 and CS-1810 Lasers
We\'ve got 30-40 between kyo and copystar. Had three go bad. One was in a fairly new machine, but just out of warranty, of course. The fan actually failed first in that one. LSU sits fairly close to the fuser, and only 1 fan to vent the entire box. The other two were within a few days of each other, and the fan vents were pretty plugged. We started calling key ops to check them after that. Haven\'t had any since. Now whenever we visit the machine, we remove all the covers and vac out all the dust, just to be sure.
-
Re:CS-1510 and CS-1810 Lasers
Have sent in a couple to Ambassador Tech as they were very loud. Seem to work fine now.
-
Technician
- Rep Power
- 0
alpertevfik
kyocera fs 1010 laser printer same laser unıts.I use to lsu
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks