Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Apr 2011
    Location
    Northeast, OK
    Posts
    86
    Rep Power
    28

    Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    We have a CS/KM3050ci that is displaying the message Add Paper in Cassette 1 (Letter). See attached photo.

    There is letter (oriented properly, with type set to Plain) in the tray. The "continue" button in the bottom right is grayed out. I can't get this job to print out. It won't let me delete the received fax job.

    I've upgraded FW to the latest 7.0; no luck.

    I pulled the fax option and reset all memory sticks; no luck.

    I can move print jobs up and have them print "overriding the priority" so I know the paper cassettes are good.

    I tried putting letter in all the trays including the MP tray; no luck.

    I can't get the machine to go into Maintenance Mode.

    Thoughts?
    Attached Images Attached Images

  2. #2
    Technical/IT Support 500+ Posts Venom's Avatar
    Join Date
    Nov 2009
    Location
    Ontario
    Posts
    764
    Rep Power
    40

    Re: Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    Try getting into service mode with door open, i had same issue and firmware fixed mine ver 2.45a.
    If you get into service mode, try reformatting hdd, replacing dimm's etc.
    IBM, Mita, Konica Minolta, Ricoh, Kyocera, HyPAS, Canon, Oce, Samsung, HP, TEO IP PBX/Unified Communications, Comptia Network+ Comptia PDI+ Certifications

  3. #3
    Senior Tech 250+ Posts daveyball's Avatar
    Join Date
    May 2009
    Location
    Douglas
    Posts
    314
    Rep Power
    34

    Re: Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    Quote Originally Posted by cbs View Post
    We have a CS/KM3050ci that is displaying the message Add Paper in Cassette 1 (Letter). See attached photo.

    There is letter (oriented properly, with type set to Plain) in the tray. The "continue" button in the bottom right is grayed out. I can't get this job to print out. It won't let me delete the received fax job.

    I've upgraded FW to the latest 7.0; no luck.

    I pulled the fax option and reset all memory sticks; no luck.

    I can move print jobs up and have them print "overriding the priority" so I know the paper cassettes are good.

    I tried putting letter in all the trays including the MP tray; no luck.

    I can't get the machine to go into Maintenance Mode.

    Thoughts?


    set your paper tray to auto paper size, faxes can't deal with any paper size set

    had this the other day

  4. #4
    Technician
    Cs3050ci recieved fax "stuck" in print jobs "add paper..."


    Join Date
    Jul 2009
    Location
    Central NJ, USA
    Posts
    41
    Rep Power
    30

    Re: Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    Has this same issue on a 3551ci today, thanks for the insight. Changed paper setting to Auto and fax printed right out. It's strange that I had never seen this before, but there's a first time for everything.
    Thanks again,
    Chris

  5. #5
    Service Manager 5,000+ Posts
    Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    Had this same issue on an x02 series set trays to auto. Bit bizarre not yet resolved with a firmware fix.

    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  6. #6
    Master Of The Obvious 10,000+ Posts
    Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Cs3050ci recieved fax "stuck" in print jobs "add paper..."

    Quote Originally Posted by daveyball View Post
    set your paper tray to auto paper size, faxes can't deal with any paper size set

    had this the other day
    +1 on this one. All trays MUST be set to AUTO paper size detection for faxes to print. It's a weird Kyocera quirk. Especially on this model, it's very common for the enduser to break the rear paper tray guide such that it auto detects Statement R instead of Letter. The tech that goes out there may not know why this is happening, and hard set's the size, thinking that they've fixed something, when in fact it will not print faxes any more. The right thing to do is to order and replace the rear guide, so the tray (or trays) can auto detect the correct size.

    If you're interested, the cause of that rear guide breaking is filling the paper tray to the top then slamming it hard. The weight of the paper snaps off a small feature on the bottom of the guide. Good luck getting the enduser to change that behavior.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here