Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7
  1. #1
    Field Supervisor 500+ Posts
    Join Date
    Oct 2012
    Posts
    605
    Rep Power
    25

    TASKalfa 3010I intermittent black prints

    We have a 3010i that since it was new very intermittently we will get black prints, then it will work fine. Replaced the drum unit so far and have checked the spring that provides the charge. Next we are ordering a hv. Has anyone else had this issue?

  2. #2
    Trusted Tech 50+ Posts AlbertK's Avatar
    Join Date
    Jul 2014
    Posts
    88
    Rep Power
    15

    Re: TASKalfa 3010I intermittent black prints

    Does this happen with prints and copies?? If only with copies check the Exposure Lamp.
    I with bothÖ.It is difficult to sayÖit could be Laser, Exposure Lamp, Main Charge or even the HV PCB.
    Good luck
    The product may be brilliant and the salesperson proficient, but if the technician isnít efficient, then the story will end there.

  3. #3
    Technician
    Join Date
    Jul 2010
    Posts
    17
    Rep Power
    23

    Re: TASKalfa 3010I intermittent black prints

    Quote Originally Posted by Tonerkiller View Post
    We have a 3010i that since it was new very intermittently we will get black prints, then it will work fine. Replaced the drum unit so far and have checked the spring that provides the charge. Next we are ordering a hv. Has anyone else had this issue?

    i know is old problem, but do you remember the solution? i have the same symptoms on several 3010i...

  4. #4
    Service Manager 5,000+ Posts
    TASKalfa 3010I intermittent black prints

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    5,285
    Rep Power
    185

    Re: TASKalfa 3010I intermittent black prints

    Quote Originally Posted by mad View Post
    i know is old problem, but do you remember the solution? i have the same symptoms on several 3010i...

    See the question right above your post? "Does it happen on prints and copies or copies only?"

  5. #5
    Technician
    Join Date
    Jul 2010
    Posts
    17
    Rep Power
    23

    Re: TASKalfa 3010I intermittent black prints

    Quote Originally Posted by BillyCarpenter View Post
    See the question right above your post? "Does it happen on prints and copies or copies only?"
    happens on copies and prints

    used to be narrow black lines (see attachment) but lately is the whole page
    Attached Images Attached Images

  6. #6
    Trusted Tech 50+ Posts AlbertK's Avatar
    Join Date
    Jul 2014
    Posts
    88
    Rep Power
    15

    Re: TASKalfa 3010I intermittent black prints

    Quote Originally Posted by mad View Post
    happens on copies and prints

    used to be narrow black lines (see attachment) but lately is the whole page
    It most certainly is a High voltage arcing problem.
    What happened before the lines started. Did you or someone else replace anything or work with the harnesses, maybe pinch a wire? I would clean and trace harnesses/ground/live contacts then test MC, DK, HV in that order.
    The product may be brilliant and the salesperson proficient, but if the technician isnít efficient, then the story will end there.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Sep 2010
    Posts
    52
    Rep Power
    0

    Re: TASKalfa 3010I intermittent black prints

    It happened to me too on a 3011i, I solved it by replacing the drum unit.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here